Product ID:SX-DA BRAKESHOE
MSDS Date:09/25/1989
FSC:2530
NIIN:00-231-5820
MSDS Number: BTHGP

ALLIED CORPORATION/BENDIX FRICTION MATERIALS DIV.

GREEN ISLAND
TROY, NY 12181
US

Emergency Phone: 518-273-6550/518-270-0200

Info Phone: 518-273-6550

Preparer: E.L. ROGERS

Cage: OLYW2

BENDIX CORP THE FRICTION MATERIALS DIV-ALLIED CORP

238 TROY, NY 12181 US

Telephone: 518-273-6550/518-270-0200

Cage: 76126

ASBESTOS, CHRYSOTILE

CAS: 12001-29-5

RTECS: CI6478500

OSHA PEL 0.2 FIBERS/CC

ACGIH TLV: 2 FIBERS/CC; A1;9394

ALPHA-ALUMINA (ALUMINUM OXIDE) (SARA III)

CAS: 1344-28-1

RTECS: BD1200000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9394

BARIUM SULFATE

CAS: 7727-43-7

RTECS: CR0600000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9394

CALCIUM CARBONATE (MARBLE) (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9394

GRAPHITE, SYNTHETIC

CAS: 7440-44-0

RTECS: FF5250100

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9394

MAGNESIUM OXIDE

CAS: 1309-48-4

RTECS: OM3850000

OSHA PEL 15 MG/M3 PARTICULATE

ACGIH TLV: 10 MG/M3;TDUST; 9394

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9394

GRAPHITE, NATURAL

CAS: 7782-42-5

RTECS: MD9659600

OSHA PEL 15 MPPCF; Z-3

ACGIH TLV: 2 MG/M3 RDUST; 9394

CURED PHENOLIC AND CASHEW RESINS

IRON OXIDE FUME

CAS: 1309-37-1

RTECS: NO7400000

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5MG/M3(FE)FUME,B2;94

SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

OSHA PEL SEE TABLE Z-3

ACGIH TLV: 0.1 MG/M3 RDUST;9394

LD50 LC50 Mixture:NOT KNOWN.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:ACUTE:SKIN:SOME PERSONS MAY BE
SENSITIVE TO MATL, DEVELOPING
DERMATITIS.INHAL:SILICOSIS,IRRIT.EYE:IRRIT.INGEST:GI DISTURBANCES.
CHRONIC:ASBESTOSIS,LUNG CANCER,MESOTHELIOMA WHICH MAY NOT BE
RECOGNIZED TIL MANY YRS AFT EXPOSURE.PEOPLE WHO SMOKE ARE @ A
SIGNIFICANTLY INCREASED HEALTH RISK WHEN WORKING W/AIRBORNE
ASBESTOS.
Explanation of Carcinogenicity:CONTAINS ASBESTOS [1332-21-4] WHICH IS
LISTED BY NTP AND IARC AND REGULATED BY OSHA AS A CARCINOGEN.
CRYSTALLINE SILICA.
Effects of Overexposure:SKIN:DERMATITIS, SKIN ERUPTIONS SIMILAR IN
APPEARANCE TO POISON IVY. INHAL:COUGHING, WHEEZING, SHORTNESS OF
BREATH, IMPAIRED PULMONARY FUNCTION. EYE:REDNESS, DISCOMFORT.
INGEST:GASATROINTESTINAL DISTU RBANCES:VOMIT, STOMACH PAINS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:PER MFG'S MSDS:SHOULD NOT BE NECESSARY FROM A PROPER HANDLING
OF THIS PRODUCT. HOWEVER:EYE:FLUSH W/WATER LIFTING EYELIDS.
INHAL:REMOVE TO FRESH AIR. INGEST:SEE DOCTOR IMMED. SKIN:FLUSH
W/SOAP & WATER. IN ALL CASES SEE DOCTOR.

Extinguishing Media:WATER, ABC EXTINGUISHER, FOG OR FOAM.

Spill Release Procedures:NIOSH APPROVED RESP SHOULD BE WORN.REMOVE DUST
W/VACUUM CLEANER EQUIPPED W/HEPA FILTER.DON'T USE COMPRESSED AIR OR
DRY BRUSHING UNLESS ASSEMBLY IS ENCLOSED & PROPERLY EXHAUSTED.REFER
TO OSHA ASBESTOS REGULATIONS CFR TIT29 PART1910.1001 APPF.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:THE FRICTION MATERIAL PRODUCT AS
SHIPPED IS NOT CONSIDERED HAZ BUT MACHINING/GRINDING/DRILLING &/OR
NORMAL USE MAY CREATE ASBESTOS DUST OR AIRBORNE
Other Precautions:AVOID GENERATING ASBESTOS FIBERS. AVOID BREATHING
ASBESTOS.

Respiratory Protection:NOT REQUIRED UNDER NORMAL CONDITIONS. IF
AIRBORNE ASBESTOS FIBER CONCEN EXCEED OSHA LIMITS NISOH-APPROVED
RESP FOR ASBESTOS FIBERS SHOULD BE WORN & PROPER ENGINEERING
CONTROLS IMPLEMENTED.
Ventilation:LOCAL EXHAUST PREFERRED DURING ALL OPERATIONS WHICH MIGHT
GENERATE DUST INCLUDING GRINDING & DRILLING.
Protective Gloves:COTTON, CANVAS, ETC.
Eye Protection:SAFETY GALSSES
Other Protective Equipment:INDUSTRIAL VACUUM CLEANERS EQUPPED W/HEPA
FILTERS.WATER OR OTHER DUST SUPPRESSANTS SHOULD BE APPLIED IF
BROOMS ARE USED.
Work Hygienic Practices:WASH HANDS AFTER HANDLING MATL & PRIRO TO
EAT/SMOKE/DRINK. SHOWER AFTER WORK & CHANGE WORK CLOTHES AFTER
WORKING.
Supplemental Safety and Health
MSDS FROM MFG FOR ASBESTOS ITEMS. FRICTION MATERIAL PRODUCTS MEET OSHA
DEFINITION OF "ARTICLE" HOWEVER SOME POTENTIAL MAY EXIST FOR
EXPOSURE TO ASBESTOS DUST.

HCC:N1
Spec Gravity:1.6-3.7
Evaporation Rate & Reference:0
Solubility in Water:INSOLUBLE
Appearance and Odor:LIGHT TAN TO DARK GREY COLOR SOLID WITH NO ODOR.

Stability Indicator/Materials to Avoid:YES
PER MFG'S MSDS NONE KNOWN.
Stability Condition to Avoid:PER MFG'S MSDS NONE KNOWN.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION WILL CREATE
CARBON MONOXIDE AND CARBON DIOXIDE.

Waste Disposal Methods:DISPOSE OF IN PROPER RECEPTACLES APPROPRIATELY
LABELLED IAW APPLICABLE FED/STATE/LOCAL LAWS AND REGULATIONS. PLACE
RECEPTACLES IN AN "AUTHORIZED LANDFILL" AS DESIGNATED BY FEDERAL OR
STATE AUTHORITIES .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.